Monthly Archives: May 2014

74-344 74-343 M2070-227 exam study guide

Posted on by

 

 

VCP550 Exam Dumps

Posted on by

VCP550 Exam Dumps

  • Code:VCP550
  • Click Here: more information
  • Exam Demo:
  • Q1
    An administrator is planning a vSphere infrastructure with the following specific networking requirements:
    - The ability to shape inbound (RX) traffic
    - Support for Private VLANs (PVLANs)
    - Support for LLDP (Link Layer Discovery Protocol)
    What is the minimum vSphere Edition that will support these requirements?
    A. vSphere Essentials Plus
    B. vSphere Standard
    C. vSphere Enterprise
    D. vSphere Enterprise Plus
    Answer: D
    Q2
    What two IT infrastructure components are virtualized by vSphere Essentials? (Choose two.)
    A. Networks
    B. Applications
    C. Storage
    D. Management
    Answer: A,C
    Q3
    An administrator attempts to install vCenter Single Sign-On Server. The installer returns an error message indicating that the installation failed. Prior to the installation, all setup prerequisites were met. The administrator has generated a vCenter Server Single Sign-On support bundle.
    Which two files should the administrator analyze to determine the cause of the failure? (Choose two.)
    A. Server\utils\logs\imsTrace.log
    B. Server\utils\logs\install.txt
    C. %TEMP%\utils\logs\vminst.log
    D. %TEMP%\vminst.log
    Answer: A,D
    Q4
    Which Single Sign-On deployment mode should an administrator use for two 5.x vCenter Servers configured with linked mode?
    A. Basic Single Sign-On with vCenter Server Heartbeat
    B. Multisite Single Sign-On
    C. Basic Single Sign-On
    D. Single Sign-On with Linked Mode
    Answer: B
    Q5
    Which two statements below could explain why the vSphere Client is reporting N/A for hyperthreading? (Choose two.)
    The physical CPUs in the host do not support hyperthreading.
    A. Hyperthreading is disabled in the host’s BIOS.
    B. The physical CPUs in the host are not multi-core.
    C. The number of CPUs meets or exceeds the maximum without hyperthreading.
    Answer: A,B

VCPC550 Practice Exam

Posted on by

VCPC550 Practice Exam

  • Code:VCPC550
  • Click Here: more information
  • Exam Demo:
  • QUESTION NO: 1
    Which workflow should the administrator follow to create a High Availability (HA) cluster?
    A. Select a datacenter, create a cluster in the datacenter, add resources to the cluster, enable HA, and configure HA-specific settings
    B. Select a resource pool, create an HA Cluster in the resource pool, add resources to the cluster, configure HA-specific settings, and enable HA
    C. Select a datacenter, create an HA Cluster, add resources to the cluster, configure HAspecific settings, and enable HA
    D. Select a resource pool, create a cluster in the pool, add resources to the cluster, enable HA, and configure HA-specific settings
    Answer: A
    QUESTION NO: 2
    What should an administrator do to configure multi-pathing using software iSCSI?
    A. Bind the VMkernel ports to the software iSCSI initiator
    B. Configure Zoning between the hosts and SAN switches
    C. Configure NIC teaming on the associated uplinks
    D. Ensure jumbo frames are enabled end-to-end
    Answer: A
    QUESTION NO: 3
    A vSphere administrator needs to upgrade a single extent VMFS3 datastore to VMFS5 and expand it to 4TB in size. The storage administrator has already expanded the underlying LUN to 4TB.
    Which steps should the vSphere administrator take?
    A. Expand the VMFS3 datastore to 4TB and then upgrade to VMFS5
    B. Upgrade the datastore to VMFS5, manually change the partition scheme to GPT, and then expand the datastore to 4TB
    C. Upgrade the datastore to VMFS5 and then expand it to 4TB
    D. Change the block size of the VMFS3 datastore to 1MB, upgrade the datastore to VMFS5, and expand it to 4TB
    Answer: C
    QUESTION NO: 4
    Which VLAN configuration requires the a switch port to be configured as an access port?
    A. Private VLAN
    B. External Switch Tagging
    C. Virtual Guest Tagging
    D. Virtual Switch Tagging
    Answer: B
    QUESTION NO: 5
    During a physical network reconfiguration, an ESXi host briefly lost connection to the management network. High Availability (HA) began powering off the virtual machines residing on the affected host to be restarted on an unaffected host in the cluster.
    Which setting should the administrator configure to prevent this type of HA failover during planned maintenance?
    A. Host isolation response
    B. Host monitoring
    C. VM monitoring
    D. Admission control
    Answer: B

VCAD510 Practice Exam

Posted on by

VCAD510 Practice Exam

  • Code:VCAD510
  • Click Here: more information
  • Exam Demo:
  • QUESTION NO: 1
    You work for a convenience store chain that has a full data center including shared storage andmany small stores. You want to make sure that data in the stores gets copied to the main datacenter. Which solution will meet these requirements?
    A. Distributed Resource Scheduler (DRS)
    B. Storage DRS
    C. vSphere Replication (VR)
    D. VSA
    Answer: C
    Reference: http://searchvirtualstorage.techtarget.com/definition/vSphere-Replication
    QUESTION NO: 2
    Which VMware product allows for non-disruptive disaster recovery testing?
    A. vCenter Operations Manager
    B. vSphere Replication
    C. Site Recovery Manager
    D. vCenter Configuration Manager
    Answer: C
    Reference: https://www.vmware.com/products/site-recovery-manager/
    QUESTION NO: 3
    Your manager wants to know how virtual machines are going to benefit the organization. What two statements accurately explain what virtual machines do? (Choose two.)
    A. Allow users to recover deleted files themselves.
    B. Reduce your application licensing costs.
    C. Provide higher up time than physical servers.
    D. Reduce the number of physical servers.
    Answer: B,D
    QUESTION NO: 4
    You are the VMware administrator for your local hospital. A fellow administrator has asked what role a datastore plays in the environment. Which of the following is a good definition of a datastore?
    A. A datastore is used by the hypervisor to swap local memory content if needed
    B. A datastore is used as the destination for the core dump file
    C. A datastore is used by the hypervisor to store logs and performance data
    D. A datastore is where virtual machine’s files are stored
    Answer: D
    QUESTION NO: 5
    You are considering using virtual machines for your new corporate email servers. You are giving examples to your manager of the benefits this will provide. Which two examples are true? (Choose two.)
    A. Virtual machines can be reverted to prior states to make recovery from accidents simpler.
    B. Virtual machines perform faster than physical machines using the same hardware.
    C. Virtual machines allow you to add components such as network cards and hard disks while the VM is running.
    D. Virtual machines automatically increase and decrease their allocated memory while running.
    Answer: C,D

VCAP5-DCD Practice Exam

Posted on by

VCAP5-DCD Practice Exam

  • Code:VCAP5-DCD
  • Click Here: more information
  • Exam Demo:
  • QUESTION NO: 1
    When designing a storage platform, which of the following should be considered as part of the overall design?
    A. Capacity
    B. I/O requirements of the applications to be supported
    C. Disk latency tolerance
    D. Growth rate
    E. All of the above
    Answer: E
    Explanation:
    A storage platform logical design requires in-depth analysis of factors that can affect applications.
    In the case of storage, aspects that relate to the physical layer—such as the amount of usable space required for services; the size, number, and speed of disks; and how fast the data is being produced—could have a substantial impact to the storage platform.
    Chapter 4, Storage Design – The Logical & Physical Approaches
    QUESTION NO: 2
    You are the technical designer for a vSphere platform transformation project. After conducting SME interviews and using various platform information-gathering methods, you have created a high-level design document.
    This document specifies the following:
    Requirements:
    R1. The solution must not have a single point of failure.
    R2. Production applications must not have an outage of more than 10 seconds.
    R3. Data must be based in the UK.
    R4. There is a 7-year retention policy for contracts.
    R5. Applications should support existing and developing workloads for the next 3 years’ growth.
    Spec of servers:
    Web 1 vCPU, 2 GB RAM, 100 GB storage
    App 1 vCPU, 4 GB RAM, 100 Gb storage
    DB 2 vCPU, 16 GB RAM, 750 Gb storage
    At a late stage in the software development life cycle of a production application developed inhouse, an unfortunate issue was identified when the application was deployed to the production vSphere cluster. The production core stacked switch has capacity issues, and this is having a serious impact on all applications for which the switch is providing network services. Within the test system, the application works as intended in the single test VLAN and with a single-host configuration.
    Which of the following could be tried to help in this situation, from a vSphere perspective? (Choose two)
    A. Redevelop the application for a virtual platform
    B. Place the application into a single-vApp network
    C. Add DRS rules to keep network traffic within the same host, where possible
    D. Configure network I/O control
    Answer: B,D
    Explanation:
    If you limit the application traffic to a specific dedicated network (that is, a separate VLAN) and using enforced DRS affinity rules, the application traffic will not traverse the ESXi host’s physical network interfaces. This will ensure that the impact of the application is minimized, while also ensuring that the application itself is not limited.
    The application servers already have vCPU settings. This suggests that the system has already being virtualized in both types of environments. Network I/O control could be useful in the event of contention, but the role of a designer would be to plan to prevent contention where possible; other options would be more beneficial. In addition, Requirement 5 specifies that the system should work with workloads over the next 3 years. Network I/O control would suggest contention very early in the platform history.
    Chapter 4, NetWork – Logical and Physical Design to allow applications to flow
    QUESTION NO: 3
    You are the technical designer for a vSphere platform transformation project. After conducting SME interviews and using various platform information-gathering methods, you have created a high-level design document.
    This document specifies the following:
    Requirements:
    R1. The solution must not have a single point of failure.
    R2. Production applications must not have an outage of more than 10 seconds.
    R3. Data must be based in the UK.
    R4. There is a 7-year retention policy for contracts.
    R5. Applications should support existing and developing workloads for the next 3 years’ growth.
    Spec of servers:
    Web 1 vCPU, 2 GB RAM, 100 GB storage
    App 1 vCPU, 4 GB RAM, 100 Gb storage
    DB 2 vCPU, 16 GB RAM, 750 Gb storage
    At a late stage in the software development life cycle of a production application developed inhouse, an unfortunate issue was identified when the application was deployed to the production vSphere cluster. The production core stacked switch has capacity issues, and this is having a serious impact on all applications for which the switch is providing network services. Within the test system, the application works as intended in the single test VLAN and with a single-host configuration.
    what storage protocol is unsuitable?
    A. NFS
    B. iSCSI
    C. FC
    Answer: A
    Explanation:
    The requirements state that the application uptime requirements would not be met if using
    vSphere HA alone. vSphere HA would invoke a restart of guest virtual machines after at least 10 seconds.
    VMware fault tolerance would meet the uptime requirements; a failover would result in zero downtime of the application. This technology can be used only with VMFS; therefore, NFS cannot be used in this design.
    Chapter 4, NetWork – Logical and Physical Design to allow applications to flow
    QUESTION NO: 4
    You are the technical designer for a vSphere platform transformation project. After conducting SME interviews and using various platform information-gathering methods, you have created a high-level design document.
    This document specifies the following:
    Requirements:
    R1. The solution must not have a single point of failure.
    R2. Production applications must not have an outage of more than 10 seconds.
    R3. Data must be based in the UK.
    R4. There is a 7-year retention policy for contracts.
    R5. Applications should support existing and developing workloads for the next 3 years’ growth.
    Spec of servers:
    Web 1 vCPU, 2 GB RAM, 100 GB storage
    App 1 vCPU, 4 GB RAM, 100 Gb storage
    DB 2 vCPU, 16 GB RAM, 750 Gb storage
    At a late stage in the software development life cycle of a production application developed inhouse, an unfortunate issue was identified when the application was deployed to the production vSphere cluster. The production core stacked switch has capacity issues, and this is having a serious impact on all applications for which the switch is providing network services. Within the test system, the application works as intended in the single test VLAN and with a single-host configuration.
    which type of data store would be required?
    A. VMFS
    B. NFS
    Answer: A
    Explanation:
    Because fault tolerance would be the only VMware technology that would meet the technical requirements, VMFS is the only choice here.
    Chapter 4, Storage Design – The Logical & Physical Approaches
    QUESTION NO: 5
    You are the technical designer for a vSphere platform transformation project. After conducting SME interviews and using various platform information-gathering methods, you have created a high-level design document.
    This document specifies the following:
    Requirements:
    R1. The solution must not have a single point of failure.
    R2. Production applications must not have an outage of more than 10 seconds.
    R3. Data must be based in the UK.
    R4. There is a 7-year retention policy for contracts.
    R5. Applications should support existing and developing workloads for the next 3 years’ growth.
    Spec of servers:
    Web 1 vCPU, 2 GB RAM, 100 GB storage
    App 1 vCPU, 4 GB RAM, 100 Gb storage
    DB 2 vCPU, 16 GB RAM, 750 Gb storage
    At a late stage in the software development life cycle of a production application developed inhouse, an unfortunate issue was identified when the application was deployed to the production vSphere cluster. The production core stacked switch has capacity issues, and this is having a serious impact on all applications for which the switch is providing network services. Within the test system, the application works as intended in the single test VLAN and with a single-host configuration.
    Which of the following vSphere cluster technologies would meet the application requirements specified in the high-level design?
    A. FT
    B. HA
    Answer: A
    Explanation:
    vSphere HA would need to wait at least 10 seconds before a restart would be possible. This would not meet requirements. In the event of a restart, it could be possible to be without the application feed database for about 15 minutes. VMware FT would enable the service to be provided without additional redevelopment.
    Chapter 4, Storage Design – The Logical & Physical Approaches

VCAW510 Exam Study Guide

Posted on by

VCAW510 Exam Study Guide

  • Code:VCAW510
  • Click Here: more information
  • Exam Demo:
  • QUESTION NO: 1
    How are fully provisioned desktops created for automated pools, whether floating or dedicated?
    A. They are deployed from a pre-configured template
    B. They are cloned from an existing desktop
    C. They are deployed form an existing .ISO image
    D. They are created from scratch
    Answer: A
    Reference:http://pubs.vmware.com/view-51/topic/com.vmware.ICbase/PDF/view-51-architectureplanning.pdf(page 10, 6th bullet)
    QUESTION NO: 2
    You are a VMware consultant. You have a client with several users that are contract accountants and must have their virtual desktops with them when they are at a client’s site. Which solution will help resolve this issue?
    A. View Client with Local Mode
    B. View Administrator
    C. Horizon Mirage
    D. Linked Clones
    Answer: D
    Reference:http://www.vmware.com/support/ws55/doc/ws_clone_overview.html(See linked clones)
    QUESTION NO: 3
    How do virtual desktops locate the nearest printer to the user?
    A. Printers are located through a pre-configured list that is stored on the ESXi physical host
    B. Printers are selected for the user by the administrator
    C. Printers are randomly chosen per print job
    D. Printers are defined through a GPO
    Answer: D
    Reference:http://myvirtualcloud.net/?p=2436(second para of the page)
    QUESTION NO: 4
    You are the VMware administrator for your company. A member of the Help Desk has asked if HA can be used with Horizon View. How should you respond?
    A. HA will restart Horizon View virtual desktops as configured by the administrator
    B. HA will restart Horizon View desktops, but will restart them after all other virtual machines have been restarted
    C. HA does not support virtual desktops deployed through Horizon View
    D. HA will only restart Windows-based virtual desktops
    Answer: A
    Reference:http://pubs.vmware.com/view-
    52/index.jsp?topic=%2Fcom.vmware.view.planning.doc%2FGUID-32026.352-0AC3-4E29-B72FC95465E7894C.html
    QUESTION NO: 5
    How can Persona Management improve virtual desktop performance?
    A. Persona Management allows the user to store their desktop and settings to a USB device to improve recovery
    B. Persona Management is used to save frequently used files to a local SSD device to improve read performance
    C. Persona Management downloads the user’s settings and desktop on demand, rather than downloading the entire configuration at logon time
    D. Persona Management allows the VMware administrator to store all user documents and settings directly to a VMFS datastore
    Answer: C

VCP-510Exam Study Guide

Posted on by

VCP-510Exam Study Guide

  • Code:VCP-510
  • Click Here: more information
  • Exam Demo:
  • QUESTION 2
    An administrator notices that when a virtual machine is placed into a resource pool, a warning indicates that the virtual machine will receive a very large percentage of the total shares for memory. Which action can be taken to resolve this problem?
    A.
    Increase the memory resource allocation to the resource pool.
    B.
    Increase the share value for the resource pool.
    C.
    Change the shares setting from custom to high, medium, or low for the virtual machine.
    D.
    Decrease the memory allocation for the virtual machine.
    Answer: C
    QUESTION 3
    An administrator views the Fault Tolerance pane of the Summary tab of a virtual machine and finds that the current status is Not Protected.
    What are two vSphere Fault Tolerance states that would cause the virtual machine to not be protected? (Choose two.)
    A.
    Stopped – Fault Tolerance has been stopped on the secondary virtual machine.
    B.
    Need Secondary VM – The primary virtual machine is running without a secondary virtual machine
    and is not protected
    C.
    Need Primary VM – The secondary virtual machine is running, and a new primary virtual machine
    cannot be generated.
    D.
    Disabled – Fault Tolerance is disabled.
    Answer: BD
    QUESTION 4
    Which two conditions prevent the application of a host profile to an ESXi 5.x host? (Choose two.)
    A.
    The host has multiple profiles attached.
    B.
    The host has not been placed into maintenance mode.
    C.
    The host is running virtual machines.
    D.
    The host is an ESXi host.
    Answer: BC
    QUESTION 5
    An administrator is editing the IP allocation policy for a vApp.
    Which three options are available? (Choose three.)
    A.
    Automatic
    B.
    Roaming
    C.
    Transient
    D.
    DHCP
    E.
    Fixed
    Answer: CDE

VCP-511 Practice Testing Training

Posted on by

VCP-511 Practice Testing Training

  • Code:VCP-511
  • Click Here: more information
  • Exam Demo:
  • QUESTION NO: 1
    An ESX Administrator plans to install additional supported components on the ESX Server that would increase the memory requirements for the Service Console. Which ESX Server partition would also need to be increased during installation as a result?
    A. /
    B. vmfs3
    C. swap
    D. /boot
    Answer: C
    Explanation:
    Mastering VMware vSphere 4, page 25.
    ‘As a general rule, swap files are created with a size equal to at least two times the memory allocated to the operating system. The installation process allocates a default amount of 300MB of memory for the Service Console; therefore, the default swap partition size would be 600MB. ‘ ‘It might be necessary to increase the amount of memory granted to the Service Console. …If additional third party applications are needed to run in the Service Console…then more memory may be needed…’
    QUESTION NO: 2
    Which of the following tasks can be selected from the home page of an ESX Server (Choose Three)?
    A. Browse Objects Managed by this Host
    B. Browse Virtual Machines in this Host’s inventory
    C. Download VMware Web Access Client
    D. Browse Datastores in this Host’s inventory
    E. Download VMwarevCenter Server
    Answer: A,D,E
    Explanation:
    The graphics shows the following tasks can be selected from the home page:
    • Download VMware vCenter
    • Browse Datastores in this Host’s inventory
    • Browse Objects Managed by this Host
    QUESTION NO: 3
    Creating which of the following optional partitions would change the default partition size for /?
    A. /tmp
    B. /home
    C. /var/log
    D. /usr
    Answer: D
    Explanation:
    ESX Required Partitions
    Mount Point Type Size
    / ext3 *
    * Calculated dynamically based on the size of the /usr partition. By default, the minimum size is 5GB and no /usr partition is defined
    QUESTION NO: 4
    Additional licensing is required once the number of cores per CPU reaches which of the following?
    A. 16 or more cores
    B. 12 or more cores
    C. 8 or more cores
    D. 6 or more cores
    Answer: C
    Explanation:
    Essentials for Retail, Essentials Plus for Retail, Standard and Enterprise support 6 cores per CPU.
    Advanced and Enterprise Plus support 12 cores per CPU.
    QUESTION NO: 5
    What is the maximum number of cores that can be used with Standard licensing?
    A. 8
    B. 16
    C. 12
    D. 6
    Answer: D
    Explanation:
    Standard supports 6 cores per Processor.

VCP510-DT Practice Testing Training

Posted on by

VCP510-DT Practice Testing Training

  • Code:VCP510-DT
  • Click Here: more information
  • Exam Demo:
  • QUESTION NO: 1
    Which two steps are part of the View Composer installation process? (Choose two.)
    A. select the Enable View Composer checkbox in the View Administrator
    B. install the View Composer on the vCenter Server system
    C. register View Composer service on the Windows system
    D. configure ODBC connection to the View Composer database
    Answer: B,D
    QUESTION NO: 2
    The View Composer Database stores information about which three components and connections? (Choose three.)
    A. Active Directory Connections
    B. View Connection Broker Connections
    C. Replicas created by the View Composer
    D. Disposable data disk created by View Composer
    E. Linked-clone desktops deployed by View Composer
    Answer: A,C,E
    QUESTION NO: 3
    Which two platforms are supported by VMware View Composer in a VMware View 5 environment? (Choose two.)
    A. VMware vCenter 4.0 Update 3 running on Windows Server 2008 R2
    B. VMware vCenter 4.1 Update 1 running on Windows XP Pro 64-bit
    C. VMware vCenter 4.1 Update 1 running on Windows Server 2003 64-bit
    D. VMware vCenter 5.0 running on Windows Server 2008 R2
    Answer: A,D
    QUESTION NO: 4
    What are three supported Database Servers for VMware View Composer in a VMware View 5 environment? (Choose three.)
    A. Microsoft SQL Server 2005 Express with vCenter Server 4.1 U1
    B. Microsoft SQL Server 2005 Express with vCenter Server 5.0
    C. Microsoft SQL Server 2005 SP3 Standard with vCenter Server 5.0
    D. Microsoft SQL Server 2008 R2 Express with vCenter 4.0 U3
    E. Microsoft SQL Server 2008 R2 Express with vCenter Server 5.0
    Answer: A,C,E
    QUESTION NO: 5
    What is the proper syntax to use when adding a domain user to the View Composer configuration?
    A. DOMAIN\USER
    B. DOMAIN.COM\USER
    C. OU=DOMAIN, CN=USER
    Answer: B

VCP510PSE Practice Testing Training

Posted on by

VCP510PSE Practice Testing Training

  • Code:VCP510PSE
  • Click Here: more information
  • Exam Demo:
  • QUESTION 2
    An administrator notices that when a virtual machine is placed into a resource pool, a warning indicates that the virtual machine will receive a very large percentage of the total shares for memory. Which action can be taken to resolve this problem?
    A.
    Increase the memory resource allocation to the resource pool.
    B.
    Increase the share value for the resource pool.
    C.
    Change the shares setting from custom to high, medium, or low for the virtual machine.
    D.
    Decrease the memory allocation for the virtual machine.
    Answer: C
    QUESTION 3
    An administrator views the Fault Tolerance pane of the Summary tab of a virtual machine and finds that the current status is Not Protected.
    What are two vSphere Fault Tolerance states that would cause the virtual machine to not be protected? (Choose two.)
    A.
    Stopped – Fault Tolerance has been stopped on the secondary virtual machine.
    B.
    Need Secondary VM – The primary virtual machine is running without a secondary virtual machine
    and is not protected
    C.
    Need Primary VM – The secondary virtual machine is running, and a new primary virtual machine
    cannot be generated.
    D.
    Disabled – Fault Tolerance is disabled.
    Answer: BD
    QUESTION 4
    Which two conditions prevent the application of a host profile to an ESXi 5.x host? (Choose two.)
    A.
    The host has multiple profiles attached.
    B.
    The host has not been placed into maintenance mode.
    C.
    The host is running virtual machines.
    D.
    The host is an ESXi host.
    Answer: BC
    QUESTION 5
    An administrator is editing the IP allocation policy for a vApp.
    Which three options are available? (Choose three.)
    A.
    Automatic
    B.
    Roaming
    C.
    Transient
    D.
    DHCP
    E.
    Fixed
    Answer: CDE